Dext vs Hubdoc vs AP software, priced honestly
Dext Alternative and Hubdoc Alternative for Accounts Payable Teams
Try it now, capture a real invoice
Your file is used only for this demo and deleted automatically within hours.
Dext is built for bookkeepers capturing receipts. If you need supplier invoices coded line by line, checked for duplicates, approved and queued for payment, AutoPayables does all of it from $49 a month for 200 invoices. Upload an invoice to see the lines it reads.
$49
a month for 200 invoices with line items
$0.50
per document Dext lists for line item extraction pay as you go
4
ledgers synced: QuickBooks Online, Xero, Sage, NetSuite
Accounting sync
What to compare before you replace Dext
Capture is the start of AP, not the end. These are the points that decide the purchase.
Line items without an add-on
Every line is read and coded on every invoice. On Dext's US business plan, line item extraction is a separate add-on listed from $20.50 a month.
Duplicate invoice checks
Same vendor and invoice number, or same amount on a near date, is flagged before approval, so a resent PDF never gets paid twice.
Approval thresholds
Small bills flow straight through. Anything above your limit waits for the owner or controller, with a timestamped approval log.
Payment runs
Approved bills are grouped into a batch payment run instead of being rebuilt from a spreadsheet every Friday.
No cap that stops extraction
Dext holds extraction once the monthly allowance is used. Scale has no invoice cap at $149 a month.
Ledger sync
Coded, approved bills post to QuickBooks Online, Xero, Sage Accounting or NetSuite with vendor and GL already set.
How a supplier invoice moves through AutoPayables
The same four steps for every bill, whether it was uploaded or forwarded.
Capture
Upload the PDF or forward it to your bills inbox. Vendor, invoice number, dates, tax, totals and each line are read.
Check and code
Duplicates are flagged and every line gets a suggested GL account you can accept or change.
Approve
Bills above your threshold route to the approver. Everything below it moves on with a log entry.
Sync and pay
Approved bills post to your ledger and join the next batch payment run.
Document capture tool against AP software
Why the category matters more than the brand when you replace Dext.
Capture and publish (Dext, Hubdoc)
- Reads the document and publishes a transaction
- Line items as a paid add-on on Dext
- Approvals handled in email or in the ledger
- Duplicates caught when someone notices
- Payments built by hand
Accounts payable software (AutoPayables)
- Reads the invoice, checks it, routes it and prepares payment
- Line items read and coded on every plan
- Approval thresholds with a timestamped log
- Duplicate check on every bill before approval
- Batch payment runs from approved bills
Who each option suits
Matched to the job you are doing, not a feature count.
Bookkeeper with 30 small clients
Stay on Dext practice plans or use Hubdoc on Xero. Receipt capture and per-client billing are what you need, and we do not sell that.
Single business, 100 to 500 supplier invoices a month
AutoPayables. Line items, duplicate checks and approvals are included, and the price is published.
Xero user with a handful of bills
Hubdoc is included with Xero and may be enough until approvals become a problem.
Owner who approves every large bill
AutoPayables approval thresholds put only the bills above your limit in front of you, with the PDF and coding attached.
Controller closing month end on time
AutoPayables has no extraction hold at an allowance on Scale, so late-month invoices are read the day they arrive.
Team paying 1099 contractors
AutoPayables tracks vendor 1099 status alongside the bills, so year-end filing starts from a report.
Short answer: the best Dext alternative depends on what you use Dext for. If you are a bookkeeper capturing receipts and bank statements for many small clients, Dext is hard to beat and Hubdoc is the cheaper option if you already pay for Xero. If you run accounts payable for one business and need supplier invoices captured, coded line by line, approved and queued for payment, you are buying AP software, and AutoPayables does that from $49 a month for 200 invoices, with line items and approvals included.
Dext prices on this page come from Dext's own US pricing page, checked in November 2026. Where Dext does not publish a number, we say so.
Dext alternatives at a glance
| Tool | Built for | Published US price | Where it wins | Where it falls short for AP |
|---|---|---|---|---|
| Dext (Prepare) | Bookkeepers and small businesses capturing receipts, bills and statements | $302.50 a year ($25.21 a month billed annually) for 250 documents and 5 users; add-ons extra | Receipt capture, mobile app, bank and supplier statement extraction, practice plans for firms | Line items and supplier statements are paid add-ons; no approval chain or payment run |
| Hubdoc | Xero users who want documents fetched and attached to transactions | Included with a Xero subscription | Costs nothing extra on Xero | Built around Xero, no AP approval routing or payment runs |
| AutoPayables | AP teams of 1 to 10 people paying suppliers from QuickBooks Online, Xero, Sage Accounting or NetSuite | Growth $49 a month (200 invoices), Scale $149 a month (unlimited); $288 or $888 billed yearly | Line-item capture included, duplicate checks, approval thresholds, batch payment runs, 1099 tracking | Not a receipt or expense app, no bank statement extraction, no per-client practice billing |
Why AP teams start looking past Dext
Dext describes itself as capture, processing and publishing. That is exactly what a bookkeeper wants: get the paper in, read the numbers, push a clean transaction to the ledger. The friction shows up when the same tool is asked to run payables for a company with real approval rules.
The first sign is the add-on bill. On Dext's US business plan, line item extraction is listed from $20.50 a month or $0.50 per document, and supplier statement extraction is priced the same way. If your invoices need to be coded per line (freight on one account, materials on another, a project code on each), that add-on is not optional. A team processing 200 multi-line invoices a month pays the base plan plus the line item tier, before anyone has approved a single bill.
The second sign is the cap. Dext's page says that once the monthly document allowance is reached, uploads are still accepted but data extraction waits until the next billing date or an upgrade. For a business that closes the month on the last working day, an invoice sitting unread for a week is a late payment, not a minor delay.
The third is everything after capture. Dext publishes the transaction to your ledger. Who signs off a $6,400 invoice, whether that invoice number was already paid last month, and which bills go in Friday's payment run are questions for another tool. Most teams answer them with email threads and a spreadsheet, which is the manual work they were trying to get rid of.
What AutoPayables does differently
AutoPayables is accounts payable software, not a document vault. Every supplier invoice that arrives, by upload or forwarded to your bills inbox, is read for vendor, invoice number, dates, totals, tax and every line. Each line gets a suggested GL account, and the bill goes through the same path every time:
- Duplicate check before anyone approves. The same invoice number from the same vendor, or the same amount on a near date, is flagged. Our duplicate invoice detection runs on every bill, not as an add-on.
- Approval thresholds. Bills under your limit go straight through; anything above it waits for the owner or controller, with a timestamped log. See how invoice approval routing works.
- Sync to your ledger. Approved bills post to QuickBooks Online, Xero, Sage Accounting or NetSuite with the coding already done. QuickBooks teams can read the details on QuickBooks AP automation, Xero teams on Xero AP automation.
- Payment runs and 1099 tracking. Approved bills are grouped into a batch payment run and vendor 1099 status is tracked, so the end of the year is a report, not a project.
A worked month, priced both ways
Take a distribution business with one AP clerk and an owner who approves anything over $2,500. It receives 180 supplier invoices a month, most with several lines, and needs line-level coding for job costing.
| Cost item | Dext Prepare | AutoPayables Growth |
|---|---|---|
| Base plan, billed yearly | $302.50 a year (250 documents, 5 users) | $288 a year (200 invoices a month) |
| Line item extraction | From $20.50 a month, at least $246 a year | Included |
| Duplicate check and approval routing | Not part of the plan; handled elsewhere | Included |
| Payment run and 1099 tracking | Not part of the plan; handled elsewhere | Included |
| Year one total, published prices only | At least $548.50 | $288 |
The Dext figure is a floor, because the line item tier is listed as "from" and the approval and payment steps still need another tool or manual time. The AutoPayables figure is the full bill for this volume. If the same business grows to 400 invoices a month, Dext's slider moves to a price it does not publish for that volume, while our Scale plan is $888 a year with no invoice cap. Full numbers sit on the pricing page, and the line-by-line Dext breakdown is in our article on Dext pricing and what it costs per month.
When you should stay on Dext
Being honest about fit saves both of us a refund. Stay on Dext, or pick Hubdoc, if most of your documents are receipts and card slips rather than supplier invoices, if you need bank statement extraction, or if you are an accounting practice that wants one bill per client across dozens of small books. Dext's practice plans are priced per client with a 10-client minimum, which suits that model. AutoPayables does none of receipt scanning, bank statement conversion or per-client practice billing.
Move to AutoPayables if your pain is payables itself: invoices waiting for approval, a bill paid twice, a payment run built by hand from a spreadsheet, or a line item add-on that costs more than the plan. Firms that run AP for clients rather than bookkeeping can read our page on AP automation for accounting firms.
How to test a switch in one afternoon
Pull 20 real supplier invoices from last month, including the worst ones: a multi-page statement, a credit memo, an invoice you know was sent twice. Upload them in the tool at the top of this page. Check three things against what Dext gave you: did every line come back with the right amount, did the duplicate get flagged, and would the coding post to your ledger without edits. If those three hold, the rest is configuration.
Frequently asked questions
For accounts payable, AutoPayables is the closest fit when you need line-item capture, duplicate checks, approvals and payment runs in one place from $49 a month. For receipt capture on Xero, Hubdoc is the cheaper alternative because it comes with Xero. Bookkeeping firms with many small clients usually do best staying on Dext practice plans.
Hubdoc is better value if you already pay for Xero, because it is included. Dext is stronger on capture quality, its mobile app, statement extraction and practice plans for firms. Neither runs an approval chain or a payment run, so AP teams outgrow both once invoice volume and sign-off rules grow.
Dext's US business plan is $302.50 a year, which works out to $25.21 a month billed annually, for 250 documents and 5 users. Month-to-month billing costs more. Line item extraction and supplier statement extraction are add-ons listed from $20.50 a month each, and bank statement extraction from $13 a month.
Dext focuses on capturing, processing and publishing documents to your accounting software. Approval routing with thresholds, duplicate checks before sign-off and batch payment runs are what AP software adds on top. AutoPayables includes approval thresholds and a timestamped approval log on every plan.
Yes. AutoPayables syncs approved bills to QuickBooks Online, Xero, Sage Accounting and NetSuite, so your chart of accounts and vendor list stay where they are. Forward new supplier invoices to your AutoPayables inbox instead of Dext and run both side by side for a month if you want to compare.
No. AutoPayables is built for supplier invoices in accounts payable, not expense receipts or bank statements. If most of your documents are card slips and receipts, Dext or Hubdoc fits better. If most are supplier invoices that need coding, approval and payment, AutoPayables fits better.
Run your own invoices through it before you switch
Upload a real multi-line supplier invoice above and check the lines, the coding and the duplicate flag against what you get today. Plans from $49 a month.